Название: Компьютеры и ПО Отправлено: Hun от 05 Марта 2002, 19:41 Нужны дрова под XP на сканер HP 5 p под SCSI карту Symbios Logic 53 c 416
Название: RE: Компьютеры и ПО Отправлено: Kuzya от 25 Марта 2002, 02:32 Ищи архив 416w2k.zip - там драйвер под W2k, но должен работать. Я пробовал, но есть проблемы со стабильностью работы. IMHO, наилучшая работа сканера этой модели достигается под NT4.0 Deskscan 2.8.
Windows 2000 Driver ****Disclaimer**** LSI Logic is providing a special, one-time release version driver for Windows 2000 only, for use with the SYM204xx ISA SCSI cards. This driver has been functionally tested using Windows 2000 Professional with HP Deskscan II v2.8 software, and Windows 2000 Server using the built-in imaging software. This driver is being provided AS-IS, and without technical support from LSI Logic (formerly Symbios). Hewlett-Packard has dropped the SYM204xx ISA SCSI card from their scanner packages, and no longer support or provide upgrades for this ISA SCSI card. This card has reached the end of its technical life span and is no longer in production or available for distribution. The LSI Logic supported solution for Windows 2000, or Windows 98 using a HP scanner, is to upgrade to a PCI SCSI host adpater card, model SYM20810 (currently about $30.00). The Logo'ed driver in Windows 2000, (symc810.sys), as well as the bundled driver in Windows 98 (symc8xx.mpd) support this card. North American users can call our distributor, Insight Electronics at 1-888-677-3135, for pricing and ordering, or visit their website at: http://www.insight-electronics.com/. Overseas users can find the nearest LSI Logic distributor at: http://www.lsilogic.com/contacts/index.html. LSI Logic provides a link to older drivers for HP scanners running Windows 95 and Windows NT4.0 at: http://www.lsilogic.com/products/techsupp/support drivers/ hpdrivers.html?agree=Agree. **********************Installation Instructions************************ 1. Install Windows 2000; turn off system, add the SYM204xx ISA SCSI card, attach the scanner; reboot. 2. Windows 2000 will prompt "Found New Hardware." 3. Insert floppy disk with the Windows 2000 driver, click on browse, go to a:sym4160.inf; (http://sym4160.inf;) click "ok". 4. Windows 2000 will prompt "Digital Signature Not Found." Click "yes". 5. Next should prompt "Hardware Found," click "Finish." 6. The driver is now installed. |